Steps to Check Marble Tiles Quality

Steps to check marble tiles quality will be discussed in this passage. Marble is a natural stone which is used in construction of residential buildings, public buildings, offices, and religious structures. Apart from flooring, marble tiles are also used in blacksplash, countertops, facades and as decorative wall cladding. For more durability, it is advisable to use good quality marble. There are many ways and means for inspecting quality of marble.

Steps to Check Marble Tiles Quality

Before buying marble tiles for your house, a homeowner must check its quality at site. Here are some ways in which you can get a rough idea about quality of marble.

STEP 1

Flip the marble tile over and look at the back. If the back of the tile appears to be covered in a mesh or net, this marble is more fragile than others. The mesh is fiberglass resin and is used to reinforce the stone against cracking or breaking. This marble may not be as suitable for high traffic applications, not because it may crack, but because it may scratch or etch more easily.

STEP 2

Examine the surface of the marble under a light, holding it at a 45-degree angle. If there are small, dull patches on an otherwise polished surface, the marble may have “fill” in small holes or fissures in its surface.

STEP 3

Examine the marble for veins on its surface and then flip the tile over to see if there is a crack or fissure in the same place on the back of the stone. Small fissures are common in some stones and for wall use, or low traffic areas will not affect quality or use.

STEP 4

Ask for the marble’s complete name. Thassos AAA, for example, is a higher quality of stone than standard Thassos. Also, ask for the marble’s hardness factor. If a stone has a high hardness factor, yet seems to have fibreglass resin, fill or fissures, this is a poor quality tile of that stone. A stone with a lower hardness factor may have these qualities present without it affecting the stone’s overall quality or use.

There are many tools for cutting stone, but stone cutting blades are the best.

Some Practices to Check Quality of Marble at Site:

Check all pieces for uniformity in color, size and quality as specified.
One face of the marble should be polished, and all four sides machine cut.
It should be straight and uniform in thickness. Non-uniform thickness results in the uneven floor and can cause accidents at home.
Marble tiles must be checked for even sizes, as uneven sizes make it difficult to cut, install as well as grout it. More wastage of material will occur.
Along with the front surface, also check the backside of the marble slab. If the back surface has wire-mesh attached to it, then such slabs must be avoided, as manufacturers put wire-mesh if marble is fragile or soft.
To have an idea of how it will look after polishing. Splash water on unpolished marble and more or less, it will give a similar look when polished.
On examining the marble’s surface under light at an angle of 45 degrees, if you find any dull surfaces and patches, then it indicates poor quality. These dull areas are due to cracks filled with the chips. This type of marble cannot be used for heavy traffic area.
Veins on the surface of marble should always be checked. While buying, flip the stone over and check for cracks or fissures. Sometimes small cracks are located along with the veins on the marble surface. Slabs with small cracks can be used in low traffic area. If wide cracks are there, then it is not good- quality marble.
Also, you can check if artificial colors are added to marble by scratching its surface. If it resists scratches, then the marble is artificial, and color can fade after installation. Pure marble has a low resistance to scratches.

Beauty of Marble Tiles

Marble tiles offer a perfect natural look in your kitchen, bathroom or living room. Marble is used as floor tiles from the past to the present and produces impressive results. Anyone who wants to have a luxurious, impressive home or workplace design can create the living space of their dreams by using the veined structure and different color options of marble tiles.

Niayesh Stone offers its customers marble flooring collections tiles of grey and black colors. Among these collections you will surely find a marble tile to suit your pleasure.

To learn more about us, click here.

Send your price quotes directly to our WhatsApp through this Link: https://wa.link/ord5k8

Sources

cmpstone.com.au/how-can-you-tell-the-quality-of-marble/

gharpedia.com/blog/check-quality-of-marble-at-site/

www.marblesystems.com/marble-tile/